Parts

- Hydroformed controlled thickness 6061-T6 aluminum alloy construction - 31.8mm oversized clamping area with 25mm on each side of clamping area designed to accept clip-on aerobar extensions - 40cm width (c-c): 290g

The newly redesigned EC70 Seatpost takes our superlight unidirectional carbon and applies our patent pending ISA technology - Independent Saddle Adjustment - which allows for completely independent fore-aft adjustment and saddle adjustment. With the 2 pitch adjustment bolts, the saddle angle gets locked into place as if you were adjusting limit screws, and unlike single bolt designs, you get adjustability and security. Available in 20mm Setback and Zero configurations. - Finish: Matte Black UD Carbon/Matte Black Head - Weight: Zero offset, 210g; Setback offset, 223g - Head offset: 0mm; 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Rail clamps: 7mm round; 7mm x 9mm oval (both included) - Material: EC70 carbon

- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 5 mm - Bend: 8 deg - Weight: 175 g

Super light carbon bars incorporating years of World Cup racing experience, optimized for the most demanding cross-country riders Choose flat or shallow rise

Shorter—Narrower—Lighter—Faster. The 612-R offers more performance based ergonomics from 150 g. The raised rear gives more grip and better power transmission. A big advantage on straight roads and especially uphill. The stronger narrower mid-section and the narrow saddle nose gives more legroom. The proven SQlab ERGOWAVE form relieves the soft tissue area and prevents energy-consuming bad posture. The saddle shell is weight and flex optimized down to the last detail. More longitudinal stiffness and perfectly coordinated material flex to the side mean more comfort with less weight at the same time. The cover is extremely light but also abrasion-resistant and non-slip. The padding is closed-cell and strongly minimized. The comfort comes from the shape and the flex behavior between rail, shell and foam, which is coordinated as an overall system.

- The saddle of choice for Pantani, Ewan, and van der Poel just got even better - ''Boost'' short nose improves thigh clearance, saddle fit and reduces weight - Superflow central exhaust increases comfort and improves pressure relief for the perineal area - Manganese rails and Soft-Tek cover for comfortable, cost-effective performance

- The saddle of choice for Pantani, Ewan, and van der Poel just got even better - ''Boost'' short nose improves thigh clearance, saddle fit and reduces weight - Superflow central exhaust increases comfort and improves pressure relief for the perineal area - Manganese rails and Soft-Tek cover for comfortable, cost-effective performance - Saddle Weight: 235g

The SLR Boost TM, with rail in Manganese ?7mm, revolutionizes and renews the unmistakable values of a great classic like the SLR. The perfect combination of comfort and performance, which has always distinguished this model, is further underlined by its compact shape and unprecedented lightness. - Affordable & high performance short racing saddle - ''Boost'' short nose improves thigh clearance, saddle fit and reduces weight - No cut-out, improves support for cyclists who have a limited pelvic rotation - Duro-Tek cover, a technical material that guarantees a strong and durable lifetime - TM rails, made from a tubular Manganese alloy, ensure a good balance of performance and weight - Selle Italia idmatch S3 / L3 - Weight: S: 220g, L: 230g

The Deore XT M8100 hydraulic disc brake is designed to provide high performance braking for a variety of MTB riding styles. Includes the brake lever and disc brake caliper. - BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding - Servo Wave Action technology means quicker brake engagement with shorter free stroke - The BR-M8100 2-piston brake caliper is optimized for cross country riding styles - Includes finned metal pads and hose - Brake Caliper Type: Post Mount - Hydraulic Hose Length: 1000mm (Front) / 1700mm (Rear) - Hydraulic Fluid Type: Mineral Oil - Rotor Included: No - Pad Compound: Metallic

- Tange Infinity CrMo steel blades with D-shaped cross-section - Fender eyelets at fork tips - Low rider pannier rack boess - Premium Cyclocross fork with CrMo blades - Choose disc or cantilever brake options - 300mm steerer (uncut) 30.0mm race 44mm straight rake fork - Designed to match the Soma Double Cross disc frame - Steerer 1-1/8" and 1", 350mm long, CrMo - Axle to crown 400mm - 44mm rake

- Tange Infinity CrMo steel fork for 27.5 (650b) or 29 MTB wheels - Suspension corrected for 100mm travel 29er frames or 120-130mm 650b frames - Unicrown with straight D-shaped blades International Standard disc mount - 47mm rake

The Skyline is the newest addition to the Ritchey saddle lineup and features carbon rails, an ergonomic curve that supports the sit bones, and a generous cutout to relieve perineal pressure. Its curved, two-axis shape features a rise towards the rear of the saddle and some rise into the nose of the saddle, making this shape ideal for riders who lack flexibility and want more support. - Vector Wing design - Dimensions: 277x147mm - Rails: carbon fiber - Rail dimensions: 8x8.5mm - Shell: Nylon + carbon fiber - Padding: superlight polyurethane foam - Cover: premium Ritchey synthetic upper - Weight: 184g

The PN 1.1 answers the call for a softer option in our Performance Narrow line. It has 40-series padding, making it a great choice for riding in thin triathlon-style shorts, or for anyone who simply wants a softer ride. Similar to the other PN saddles, the PN 1.1 is 110mm wide, offering superb thigh and hamstring clearance. This allows for more rider body movement around the seat, and is great for diving into fast corners. Like all ISM saddles, the PN 1.1 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - Narrow design for maximum thigh clearance - Enables total freedom-of-movement for the rider - Same shape as the PN 1.0, with extra padding Commonly used for: - Road bikes - Triathlon bikes - Time Trial bikes Tech specs: - Category: Performance Narrow - Length: 275mm - Width: 110mm - Padding: 40-Series Foam and Gel - Rails: Satin Steel - Colors: Black, white Available as part of the ISM Demo Program

Magura hs11 linear pull brake and lever - front or rear 4-finger lever black - The Magura HS11 hydraulic rim brake and lever features an uncomplicated design, well-suited for trekking or city riding. - The HS11's enormous braking power and precise modulation ensure maximum safety in the urban jungle - The 4-finger aluminum lever blade is ergonomically optimized for a unique braking feel - The hydraulic system is "care-free" with the use of Magura's Royal Blood mineral oil

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 30mm - Outer Diameter: 42mm - Width: 7mm

Competition-oriented and customizable for refined fit, feel, and power transfer. Details - Durable alloy body - Durable cast steel wings - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - Hex alloy endcap and bashguard - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system Specs - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 52mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 320g per pair - Wing Material: 17-4PH stainless

Crank Brothers Mallet DH, the choice of DH world champions. - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float and release angle - Premium bearings and double seal system - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material cast: Stainless steel - Spring material 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type IGUS LL-glide bearing - Outer bearing type enduro cartridge bearing - Cleat premium brass cleats with shims included - Adjustable pins 8 per side for grip - Endcap hex alloy - Weight: 479 grams

Get a little more ankle room with this long-spindle version of Crank Brothers' Mallet E pedal. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface  - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system

The ultimate pedal for enduro riding and racing, with a longer spindle. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Adjustable Pins: 6 per side - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 57mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 424g per pair - Wing Material: 17-4PH stainless

FSA Service Parts for BB30 Frames

Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)

Sleek, easy to use, yet immensely powerful. Code R packs a winning punch with a reliable DirectLink lever mated to Code’s new oversized four-piston caliper. SRAM’s signature ergonomics are supplemented by the tool-free reach adjust for a fit to each riders’ needs, to unleash Code’s superior braking power, consistency, and modulation. - Four aluminum pistons provide the stopping power and excellent heat management - Stainless steel heat shield breaks the thermal connection between the brakes pads and the caliper body, which reduces fluid temperature - Forged aluminum lever body and blade - Bleeding Edge design for easier maintenance - Includes steel-backed sintered metal pads

We spend a lot of time obsessing over feel, and SwingLink technology brings our best R&D to life. The G2 RS offers riders the joys of SwingLink—getting brake pads to the rotor fast, then moderating pressure with smooth modulation. It's one small movement for your finger, one monumental upgrade to your braking. - Power organic pads give riders both feel and bite - Bleeding Edge for simple fluid installation and maintenance - Tool-free reach adjust for quick personalization

Our Box Four tier is for those people who just want less fuss! You're fond of Prime 9, but know 8 is enough, and surely 11-42T is plenty of range for an 8-speed cassette. Our derailleur still has the Limited Slip clutch but now arrives with a more compact cage. The custom 8-speed chain is built for abuse, although it's sophisticated enough to have its own Wide/narrow chainring. Push through fewer gears with a no-nonsense shifter. This combo will transport you to 1 by territory for less than $200.

Our Box Four tier is for those people who just want less fuss! You're fond of Prime 9, but know 8 is enough, and surely 12-42T is plenty of range for an 8-speed cassette. Our derailleur still has the Limited Slip clutch but now arrives with a more compact cage. The custom 8-speed chain is built for abuse, although it's sophisticated enough to have its own Wide/narrow chainring. Push through fewer gears with a no-nonsense single shifter whose action is limited to one downshift per lever swing. This combo will transport your E-bike to 1 by territory for less than $200. INCLUDES - Box Four 8 Speed Single Shift Shifter - Box Four 8 Speed Wide Rear Derailleur - Box Four 8-Speed 12-42T E-Bike Cassette - Box Four 8 Speed 116 Link Chain Natural

Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams

Allows for additional hand positions on long rides and during endurance events - Superlight carbon construction, 98g with the provided stainless hardware - Compatible with most 31.8mm diameter flat MTB and road handlebars - Allows GPS and LED attachments - Only requires 2.5~3Nm of torque when mounting to the handlebars

Replacement crank arm for Descendant Carbon Eagle GXP

The EX1 derailleur capitalizes on the robust build and precise shifting attributes of the X-HORIZON design, to create the world’s first derailleur specifically made for E-MTBs. Engineered to handle high-torque, low-cadence shifting across the 11-48 tooth E-Block cassette, the EX1 derailleur gives E-MTB riders clean, confident shifts, so they can spend more time enjoying the ride. - Proven SRAM X-HORIZON design that reduces shift force, ghost shifting and chain slap - 12-tooth X-SYNC pulley wheels - The EX1 derailleur is purpose built for E-MTB - Speeds: 1 x 8-speed - Weight: 289 grams - Color: Black - Outer Cage: Aluminum - Inner Cage: Aluminum - Bearings: Steel - Cage Size: Medium - Max Tooth: 48

Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner