Pedals

Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. - Kit includes eight 1mm traction pads and eight 2mm traction pads

Customize and optimize the shoe/pedal interface. - Refine the interface between the shoe tread and pedal body - Four (4) contact sleeves - 1mm thickness

Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)

Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 440mm length

RaceFace Chester Pedal Pin Kit 20 Pins Black

IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer

Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness. - 28pcs rear load pins - 16pcs front load pins - Tool included

Replacement straps for Sunlite FlatForm II pedals - Strap size: 340 x 55mm

Dimension Nylon Basic Toe Straps -Durable metal buckle -Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel) - 450mm

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

- Plastic nylon molded body - Chromoly spindle - 318g pair

Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

The Curve Sole Measurement Tool works in conjunction with the flat sole shims to correct the radius of flat sole shoes and prevent unwanted squeaking. There are 4 radius measurements, one per side, that measure the sole and indicate whether a shim is needed or not.

- Protects cranks from damage caused by overtightening pedals - Can be used for bike fit adjustments, dependent on pedal thread length engagement

The Burgtec composite pedal is everything you'd expect from a Burgtec pedal but at a more affordable price point. Uncompromised grip, rugged durability, the exact same sculpted simple lines, fully backed up with spares and at an affordable price. The best of both worlds can exist. - Nylon and Fibreglass Body - SCM415 Cromo Axle - All replaceable steel pins - 16mm Profile, 1mm Dish - 96mm x 102mm Platform - Weight: 376g

Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market. From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal. - Weight: 379g - Platform material: 7075 Alloy - Profile: 15mm - Platform: 100mm x 102mm - Dish: 2mm (concave) - Pin material: Stainless steel - Pin width: 3.5mm - Pin height: 4.5mm - Axle Material: EN24T Steel - Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal

Replacement Pedal Internals for your Burgtec Penthouse Flat MK5 Pedals. Keep your pedals running sweet with some new internals. - 2 x Seals - 2 x Large Bush - 2 x Small Bush - 2 x Bearings - 2 x Washer - 2 x Nylock nuts

Crank Brothers' Candy pedals combine 4-sided cages for super-easy entry/exit with composite platforms for top-notch support. The Candy 1s feature chromoly axles for durability, extra secure springs, and an open design to quickly shed mud, making them ideal for sloppy conditions and cyclocross. They keep your feet close to the axles for maximum pedal power, too.

Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Plus, their open design sheds mud so they work great in all conditions. And, the Eggbeater 1s feature chromoly axles, stainless-steel springs, steel bodies and 6 degrees of float.

Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Plus, their open design sheds mud so they work great in all conditions. And, the Eggbeater 3s feature chromoly axles, stainless-steel springs, strong cast steel bodies and wings, inner needle bearings, and 6 degrees of float. Crank Brothers has also made the Eggbeater internals water-tight for excellent durability.